Description
Simplify and Correctly Document Your Validation Process
The E-Val Pro Plus wired validation solution is designed for validation applications in life science that require compliance with FDA guidelines and international GMP standards.
It’s ideal for Temperature Controlled Units (TCUs, CTUs) with an extreme temperature range or where real-time measurements are needed, like:
- Ultra Low Temperature Areas
E.g. Liquid Nitrogen Containers for the cryopreservation of living cell material at -196 °C, or Freezers. - High Temperature Areas
E.g. Heat Tunnels / Dry Heat Sterilization (for Depyrogenation – in the range of +180 to 300 °C). - Sterilization in Place
For SIPs at +121 °C, because you have a real-time measurement with a cycle rate of one second. Especially at initial qualifications where you can observe the measurement and react if something isn’t going as planned. - Autoclaves
For real time measurements in Steam Sterilization Processes at 121 to 134 °C.
4 Ways Ellab Wired Validation System Can Make a Difference for You:
1. Reliability
Eliminate data gaps and avoid redoing studies and instead experience precise measurements and thorough analysis of your processes.
2. Versatility
Measure temperature, pressure, humidity, CO2, and beyond, utilizing the flexibility of E-Val Pro Plus to elevate your processes to new heights.
3. Efficiency
Reduce time-to-market and downtime with automated setups, analysis, and clear pass/fail reporting, keeping your processes reliable, stable, and audit ready.
4. Compliance
Ensure compliance with a wired solution that offers reliable analysis and reporting for critical processes without risking your data.
Temperature Validation Equipment with Interchangeable Sensors
The E-Val Pro Plus module is equipped with 52 individual sensor inputs for thermocouples or analog/digital inputs – so you can take advantage of a wide temperature range and different measurement parameters.
The traceable and interchangeable thermocouples comprise of a smart USB connector with in-built cold junction compensation. Each connector maintains the calibration offsets reducing the pre and post calibration time and efforts, so nothing is lost if you need to change sensors.
Other Measuring Parameters for E-Val™ Pro Plus
Unlike most wired validation solutions, the E-Val™ Pro Plus can measure several parameters in addition to temperature. To do this, Ellab designed a Sensor Interface which can be fitted with various sensors, thereby covering all a wider range of measuring parameters.
Unlock measurements for:
- Temperature
- Pressure & Vacuum
- Relative Humidity
- CO2
- Conductivity
