This Reichert test method covers the procedure for determining wear properties (WP) and Extreme pressure properties (EP) to evaluate lubricant and additives.
enquire Now
This test rig consists of rigidly mounted test roller (cylinder) is pressed against friction wheel which is cross-cylinder contact configuration. The friction wheel partially submerged in the lubricant bath under test. In this test, rig loading is applied through dead weights. Normal load and frictional force measured through dual measurement load cell. Contact type acoustic emission detector Incorporated for scratching noise from the contact
Temperature - Ambient to 1200C Temperature Sensor - RTD Sliding Speed - 0.85 to 2.50 m/s Friction Wheel Dia - 31.4 dia x 10mm length Test Roller - 12mm dia x 15mm length Preset Timer - 99hrs:59min:59sec Acoustic Sensor - To measure noise level 10μ least count 10mm range - To measure the radial wear Dial indicator Sample volume - 25ml approx.
Pin and Vee Block Tester
Air Jet Erosion Tester
Shear Stability Tester
Grease Noise Tester
